Snapdragon qualcomm flash tools apk#
Snapdragon qualcomm flash tools install#
Snapdragon qualcomm flash tools android#
Snapdragon qualcomm flash tools password#

(You may need to uninstall other rproc mode package first.)ĭisabling the remote processors frees up a bit of RAM that they would otherwise use (~80 MB of ram for modem) so you may want to disable the modem if you install the system on an APQ8016 device where the modem core is currently unused.Īudio should work out of the box with PulseAudio.

Snapdragon qualcomm flash tools apk#

You can change the mode by installing one of those packages by running sudo apk add soc. On msm8916 devices it's possible to choose if you want the remote processors (such as wifi and modem) to be enabled or not. pmbootstrap flasher flash_rootfs -partition userdata.Note that you can also install the system image onto an sdcard with pmbootstrap install -sdcard=/dev/sdX: It is recommended to install large phone UIs like Plasma Mobile or Phosh to userdata partition, because system partition is too small for them.(Ignore the proposed flash_kernel step as lk2nd will boot the kernel image from the installed rootfs).Put phone into 'lk2nd mode', and continue.if your device is a tablet with APQ8016), you may want to pick no-modem. You may get prompted to select a provider for soc-qcom-msm8916-rproc: If you don't want to use the modem on your device (e.g.pmbootstrap init (choose your device, UI you like and other options).However, at the moment it works only on Linux systems. Using pmbootstrap you can generate your own fully customized images, with many more UIs to choose from and other options.

Snapdragon qualcomm flash tools password#

The default username is user, and the default password is 147147. Do not forget to erase system partition to prevent accidental booting from it. Unpack this file ( unxz *-*.img.xz) and with phone in 'lk2nd mode' flash it to userdata partition. Pick the latest date, choose UI between the ones that are available and download the rootfs image file only (since lk2nd 0.10.0 you don't need the legacy *-boot.img image any more): ) consider using the pmbootstrap installation method instead (documented further below).Ĭhoose an image for your device from the download page. no proprietary firmware, different UI, extra packages. If you want more control about the installation (e.g.

Phosh or Plasma Mobile) to choose from and they are updated every week. The MSM8916-based devices in the community category (see table above) have pre-built images that can be easily installed without pmbootstrap. Your device may have degraded support if you boot newer kernel version on an outdated lk2nd so it's advised to check for new lk2nd updates whenever you see new kernel package release.

It makes various preparations to boot upstream Linux kernel and often gets changed alongside the kernel releases as development continues. Please make sure that you are always updated to the latest lk2nd. Once you have lk2nd installed and working, you can proceed with the common installation procedure documented below. The instructions for installing lk2nd vary from device to device, so please check your device wiki page for instructions. Those are informational and you shouldn't be worried if some are marked not as in the screenshot above. Lk2nd fastboot screen example Note: lk2nd makes some checks to show device status and capabilities of the firmware such as secure-boot status. The advantage of this approach is that there is a consistent installation procedure for all MSM8916 devices (once lk2nd was installed), and various device-specific quirks can be handled within lk2nd.

Snapdragon qualcomm flash tools android#

Instead, it is flashed in place of an Android boot image, so that the stock bootloader will first load lk2nd instead of a regular Linux kernel. It does not replace the stock bootloader. The WiFi-only variant gt510wifi of samsung-gt510 is APQ8016.Īll MSM8916 devices in postmarketOS use lk2nd as secondary bootloader. The WiFi-only variant gt58wifi of samsung-gt58 is APQ8016. There is a slightly higher clocked variant (CPU cores up to 1.4 GHz) available as Snapdragon 412.ĪPQ8016 (Snapdragon 410, WiFi-only) Device MSM8916/ APQ8016 (or Snapdragon 410) is Qualcomm SoC released in 2014, with great mainline Linux support orginally added for the Dragonboard 410c.